Very welcome to JHEMCU

Products >> FC >> 

  • JHEMCU Betaflight F7-XSD 20*20mm FC OSD 5V 9V BEC
  • JHEMCU Betaflight F7-XSD 20*20mm FC OSD 5V 9V BEC
  • JHEMCU Betaflight F7-XSD 20*20mm FC OSD 5V 9V BEC
  • JHEMCU Betaflight F7-XSD 20*20mm FC OSD 5V 9V BEC
JHEMCU Betaflight F7-XSD 20*20mm FC OSD 5V 9V BEC JHEMCU Betaflight F7-XSD 20*20mm FC OSD 5V 9V BEC JHEMCU Betaflight F7-XSD 20*20mm FC OSD 5V 9V BEC JHEMCU Betaflight F7-XSD 20*20mm FC OSD 5V 9V BEC

JHEMCU Betaflight F7-XSD 20*20mm FC OSD 5V 9V BEC

 The F7-XSD equipped with MPU6000 has faster acceleration response; integrated 5V/2A, 9V/3A BEC, and integrated OSD.
 
Input voltage 2S-6S, comes with two independent BEC, supports mainstream SBUS, DSM2/DSMX, IBUS, TBS and other receivers on the market.
 
There is LED_STRIP interface, active buzzer interface, support DSHOT ESC.
 
    1. Specially designed for small traversing machines, suitable for racks with the size below 150mm, especially the racks within 130mm can play the advantages of small and full function;
    2. This board provides all functions, the weight is only 4.2 grams, the size is only 27*27MM, and the fixed hole distance is 20MM (M3 hole position);

Receiver configuration:
 
   When SBUS, DSM, IBUS, TBS receiver input, please configure UART2 as input interface
 
Features:
 
CPU: STM32F722RGT6
 
Sensor: MPU6000 three-axis accelerometer/three-axis gyroscope (SPI connection)
 
Power supply: 2-6S battery input
 
BEC: 5V/2A, 9V/3A
 
Receiver: Support Sbus or serial RX interface, Spektrum 1024/2048, SBUS, IBUS, TBS, etc.
 
Buzzer interface
 
Support programmable LED_Strip
 
Support BLheli suite ESC programming
 
Built-in voltage detection and alarm
 
Built-in OSD function, BF online parameter adjustment
 
Dimensions: 27*27MM, screw hole distance 20*20MM, M3
 
Weight 4.2g

Products Category

Contact Us