Very welcome to JHEMCU

Products >> AIO >> 

  • JHEMCU GH743AIO 3-6S AIO Brushless Flight Controller 40A(BLHeli_S)
  • JHEMCU GH743AIO 3-6S AIO Brushless Flight Controller 40A(BLHeli_S)
  • JHEMCU GH743AIO 3-6S AIO Brushless Flight Controller 40A(BLHeli_S)
  • JHEMCU GH743AIO 3-6S AIO Brushless Flight Controller 40A(BLHeli_S)
JHEMCU GH743AIO 3-6S AIO Brushless Flight Controller 40A(BLHeli_S) JHEMCU GH743AIO 3-6S AIO Brushless Flight Controller 40A(BLHeli_S) JHEMCU GH743AIO 3-6S AIO Brushless Flight Controller 40A(BLHeli_S) JHEMCU GH743AIO 3-6S AIO Brushless Flight Controller 40A(BLHeli_S)

JHEMCU GH743AIO 3-6S AIO Brushless Flight Controller 40A(BLHeli_S)

 
 
Product Specs:
 ESC output current 40A continuous current, 4 independent current output, USB port installed on the side, built-in USB ESD chip, all signal ports added protection buffer components, imported original, stable quality, reserved common functional interface pads, UART port There are 7 ways. Half-hole motor pad, support high current output, adopt STM32H743 processor, OSD, BEC 5V/2.5A and 10V/2A, support 3-6S battery. 
 
Flight control parameters:
CPU: STM32H743 
Sensor: MPU6000  
OSD: AT7456E 
Barometer: BMP280 
IIC: Support  
Black box: 8MB  
BEC: 5V/2.5A, 10V/2.5A  
HDVTX: DJI VTX->UART6, reserved dedicated socket, equipped with plug wire 
RC_IN:UART2 
UART: UART1, UART2, UART3, UART4, UART6, UART7, UART8 
USB: micro usb  
Size: 30.5*30.5MM (Max: 42*43MM) 
Receiver: ELRS (CRSF), TBS (CRSF), SBUS, IBUS, DSM2, DSMX  
Support WS2812 and other programmable LEDs 
Support buzzer 
Built-in voltage and current sensors  
Weight: 7.5 grams

ESC parameters
 
BLHELI_S
 
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
 
Input voltage: 3S-6S Lipo
 
Continuous current: 40A
 
Firmware: BLHELI_S G_H_30_REV16_7.HEX
 
 
Shipment packaging
 
GH743AIO *1
 
14AWG wire red *1
 
14AWG wire black *1
 
5P->8P DJI plug cable *1
 
M2*6.5MM red *4
 
XT60 with black hat *1
 
1000UF/35A capacitor *1

Products Category

Contact Us